1.Water quality is the single most overlooked issue. Do you have hard water? Do you have solids in your water?

Download the following PDF file to check  Water Quality Standards.pdf

 

2.What are the factors to affect the water jet cutting speed?

Please contact us to get the analyze chart

 

3.Multi Axis Nozzle Tilt Cutting versus X-Y with Advanced Dynamic Software

Please download the paper written by the expert Nozzle Tilt Cutting Compare 3-Axis.pdf

 

4.How to extend the nozzle tube life time?

Try rotating the focusing tube by 90 degrees at the end of every shift. A constant rotation schedule will help reduce irregular wear of the focusing tube, thereby extending its life by many hours. This simple, ten second habit at the end of the day can end up saving you hundreds of dollars per year or more

 

5.How to save the machine operation cost?

1) Only cut with the PSI you need. Many pumps will cut at 90,000 PSI and 60,000 PSI but just because the pump will do it, does not mean you have to use it. It is great to have the higher pressure if you need it, but some jobs are different, particularly in job shops. There are many benefits to running at lower pressure. The biggest being your consumables will last longer and there is less stress on the pump. Also, on some materials you can cut just as fast with 45ksi as you can at 60ksi.

2) Make sure your stand off is no more than 1/16 in. The farther away you are from the surface of what you are cutting the less quality or less speed you will get

 

6.Is the orifice really damaged?

Try to wash and clean the orifice first, sometimes it is still alive

 

7.How to decrease the cutting noisy?

If the material being cut is submersible, then it will significantly lower the audible level of the cutting. Therefore, the cutting table design for the water level adjustment is important

 

8.What is the right way to cut the small holes?

Select the right controller software and apply the dynamic pierce way

 

9.When should we change the focusing tube?

Consistently check the quality of your cut. If the kerf width is widening then it may be time to change out your focusing tube

 

10.How can I know the cutting speed and cutting edge for some specific material?

Please contact us and we will provide the estimating cutting report for you in free of charge

 

11.Yes,CNC water jet cutting is the multi-function machine tools, but how is the operation cost if we buy and use it?

Please contact us for the detailed data analyzing report

12. Compare the wire cutting,plasma cutting, flame cutting and the laser cutting, what are the advantages for water jet cutting?

Please download the following file Cutting Technologies and Comparison.pdf